http://www.raspyfi.com/forum/g.....beta-test/

Remember to change the default auto.nas settings, as described in the above thread...

The raspberry pi has problems especially with async devices, 'cause they use 24 or 32 bit for connection...

Let me know!

sudo BRANCH=fiq_split rpi-update

I got...
"Cloning into '//root/.rpi-firmware'...
warning: Could not find remote branch fiq_split to clone.
fatal: Remote branch fiq_split not found in upstream origin
Unexpected end of command stream
!!! Failed to download new firmware files"

So I tried even all of the other steps, but at the end I obtain the same problem: crackles.
Now I see (both inside mpod and with SSH/cat instruction) that I'm playing HD files (such as 24/96) but... any of them is crackling. I can heard by far less crackles when I play normal 16/44 files, but neither they are perfect

Could it be a problem given by the async USB chip of my DAC?
Or it could be simply the failed firmware update mentioned above... How could I solve that failure? (I even tried a plain sudo apt-get update, that worked flawless, but didn't solve anything).

This is the complete failure log, just in case:

pi@raspberrypi ~ $ sudo BRANCH=fiq_split rpi-update
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
*** Performing self-update
--2013-08-25 10:54:23-- https://github.com/Hexxeh/rpi-update/raw/master/rpi-update
Resolving github.com (github.com)... 204.232.175.90
Connecting to github.com (github.com)|204.232.175.90|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.github.com/Hexxeh/rpi-update/master/rpi-update [following]
--2013-08-25 10:54:41-- https://raw.github.com/Hexxeh/rpi-update/master/rpi-update
Resolving raw.github.com (raw.github.com)... 185.31.16.133
Connecting to raw.github.com (raw.github.com)|185.31.16.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6395 (6.2K) [text/plain]
Saving to: `/usr/bin/rpi-update.tmp'
100%[=======================================================================>] 6,395 12.0K/s in 0.5s
2013-08-25 10:54:49 (12.0 KB/s) - `/usr/bin/rpi-update.tmp' saved [6395/6395]
*** Relaunching after update
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
*** ARM/GPU split is now defined in /boot/config.txt using the gpu_mem option!
*** We're running for the first time
*** Setting up firmware (this may take a few minutes)
Cloning into '//root/.rpi-firmware'...
warning: Could not find remote branch fiq_split to clone.
fatal: Remote branch fiq_split not found in upstream origin
Unexpected end of command stream
!!! Failed to download new firmware files

gmeardi said
I'll try asp and post the results. Tks again!

And...? Any results?

My setup, for in-car usage:
Raspberry PI (256MB)
Musical Fidelity VDAC II (just bought, perfectly working with usb/pc or optical) connected directly to RPi via USB
TPLink MR3020 (mobile wireless router, indipendently powered) connected via ethernet wire to RPi
Power supply for RPi: 2A, plus another 0.5A to manage USB HUB (for USB data key, TPLink, Rii wireless keyboard RF key).
Latest version of RaspyFI (image downloaded in early august).

All works perfectly, except... for the music, that is affected by an HIGH crackling sound.
I can update the music db (via mPoD on iPhone), SSH with no probs, etc. But the music, whatever format I play, is really BAD. I can "notice" the music being played, but the crackles are really terrible.

Any ideas? Many TIA!
Gianluca